BAR · Business Analysis · 8 practice questions
Direct Labor Rate Variance: Formula and Calculation
Direct labor rate variance measures the hourly wage difference across actual hours worked. Below: a worked calculation showing why paying less per hour creates a favorable rate variance.
Try one first
Hint
Direct labor RATE variance (LRV) = Actual Hours × (Actual Rate − Standard Rate). Always uses ACTUAL hours, not standard hours allowed. Unfavorable when actual rate > standard rate.
Answer A. The direct labor rate variance (LRV) measures the cost impact of paying an actual wage rate that differs from the standard wage rate, isolated from any efficiency effects. The formula is: LRV = Actual Hours × (Actual Rate − Standard Rate). Using ACTUAL hours (not standard hours) is critical because the rate variance is the cost of the actual hours worked at the rate-deviation. Crestline's computation: Actual hours = 9,800; Actual rate = $21; Standard rate = $20; Rate difference = +$1 per hour (unfavorable, because actual exceeds standard). LRV = 9,800 × $1 = $9,800 UNFAVORABLE. The variance is unfavorable because Crestline paid $1 per hour more than standard for each of its 9,800 actual labor hours.
Why not B: The LRV formula uses ACTUAL hours (the hours actually worked at the actual rate), not standard hours allowed. Standard hours allowed are used in the EFFICIENCY variance formula (LEV = Standard Rate × (Actual Hours − Standard Hours Allowed)), not in the rate variance. Using 10,000 hours here mixes up the two formulas.
Why not C: Direction: Crestline's actual rate ($21) EXCEEDED the standard rate ($20), which is unfavorable (not favorable). Whether the actual hours were less than standard hours is relevant to the EFFICIENCY variance, not the rate variance.
Why not D: The total labor variance ($9,800 rate + efficiency variance) reconciles to actual cost minus standard cost, but the $200 figure here doesn't correspond to any labor variance component. Total actual labor cost = 9,800 × $21 = $205,800; standard labor cost for actual production = 10,000 × $20 = $200,000. Difference = $5,800 (the total labor variance, which combines rate and efficiency).
Worked example
Maple Manufacturing worked 1,100 direct labor hours during the month. Its actual wage rate was $18 per hour, and its standard wage rate was $20 per hour. Compute the direct labor rate variance.
| 1 | Find the hourly rate difference$18 − $20 = −$2 per hour | −$2 per hour |
| 2 | Apply the difference to actual hours1,100 × (−$2) = −$2,200 | −$2,200 |
| 3 | Classify the variance$18 < $20, so Maple saved $2 × 1,100 hours | $2,200 favorable |
Maple’s direct labor rate variance is $2,200 favorable.
Check: Those same hours would cost $22,000 at standard but cost $19,800 at actual rates, a $2,200 savings.
Key points
- Use actual hours because the wage difference applies to every hour actually worked.
- Compare hourly rates, not total payroll, to determine whether the rate difference is favorable.
- With actual minus standard, a negative labor rate variance is favorable.
How the exam traps you
- Reporting Maple’s $19,800 actual payroll as the rate variance. Measure only the wage difference: 1,100 × ($18 − $20).
- Calling the $2,200 variance unfavorable because the calculation is negative. Paying below the standard hourly rate saves money, so the variance is favorable.
Question 2
Hint
OH variance progression: 2-var (Budget + Volume) → 3-var (subdivide Budget into Spending + Efficiency) → 4-var (separate spending/efficiency for variable OH and spending/volume for fixed OH). Each level splits prior; all give same total.
Answer B. TWO-, THREE-, and FOUR-VARIANCE methods are PROGRESSIVE SUBDIVISIONS of total manufacturing overhead variance, each level splits the prior level's variance for more detail. All three frameworks produce the SAME TOTAL OH VARIANCE; they differ in how it's decomposed. TWO-VARIANCE METHOD: (1) BUDGET (CONTROLLABLE) VARIANCE = actual OH − budgeted OH at actual production. (2) VOLUME VARIANCE = budgeted OH at actual production − OH applied (standard hours × predetermined rate). THREE-VARIANCE METHOD: takes the two-variance budget variance and SUBDIVIDES it into: (1) SPENDING VARIANCE = actual OH − (variable rate × actual hours) − fixed budget. Captures price/spending differences. (2) EFFICIENCY VARIANCE = (variable rate × actual hours) − (variable rate × standard hours). Captures efficiency in OH-driving activities. (3) VOLUME VARIANCE = same as two-variance. FOUR-VARIANCE METHOD: separates spending and efficiency for VARIABLE OH and for FIXED OH. (1) Variable OH spending. (2) Variable OH efficiency. (3) Fixed OH spending (= budget variance for fixed OH). (4) Fixed OH volume variance. ANALYTICAL INSIGHT INCREASE: Two-variance: high-level, is OH controllable? Are we using capacity? Three-variance: adds insight on whether the budget variance is from spending (price) or efficiency (consumption). Four-variance: separates the dynamics of variable vs fixed OH, variable OH can have efficiency variance (consumption-related); fixed OH cannot have efficiency variance (it's fixed) but has spending and volume. CHOICE DEPENDS ON: complexity of operations, management's analytical needs, and the marginal benefit of additional detail. Many companies use three-variance as a balance. Answer A is incorrect: the methods are not mutually exclusive at a conceptual level, each is a different decomposition. A company chooses one for reporting but the others are intellectually compatible. Answer C is incorrect: the methods provide DIFFERENT analytical insight at different levels of detail. They produce the same total but distinct decompositions. Answer D is incorrect: there is no SEC registration requirement for any specific method. Cost-variance frameworks are managerial accounting tools, not financial-reporting requirements.
Question 3
Hint
Variance investigation = MATERIALITY (size: $ + % thresholds) AND PERSISTENCE (recurring vs one-off). Both directions (favorable + unfavorable) merit investigation. Favorable variances may signal best practices, stale standards, or quality compromise.
Answer C. MANAGEMENT BY EXCEPTION applied to standard cost variances: investigate variances that meet defined CRITERIA, accept the rest as routine. This focuses management attention on signals that require action. STANDARD CRITERIA, both must be considered: (1) MATERIALITY (size threshold): typically uses BOTH an absolute dollar threshold AND a percentage threshold relative to standard. Examples: 'investigate any variance > $10,000 OR > 5% of standard.' Both thresholds matter, a small percentage on a large item can still be a meaningful dollar amount; a large percentage on a small item may be operationally significant despite the small dollar size. (2) PERSISTENCE (recurring): a one-off variance often resolves itself (random fluctuations, one-time events). A recurring variance signals a SYSTEMATIC ISSUE (process problem, standard out of date, equipment issue, supply chain problem). Persistent variances warrant investigation regardless of individual size. INVESTIGATE VARIANCES MEETING EITHER CRITERION: a single very large variance OR a pattern of recurring smaller ones. INVESTIGATION OF FAVORABLE VARIANCES: also warranted. Reasons: (1) may reveal best practices to be replicated; (2) may indicate stale standards (workers exceeding outdated benchmarks); (3) may signal quality compromises (favorable cost variance from skipping steps); (4) may indicate misclassification or recording errors. Ignoring favorable variances is a common mistake. PRACTICAL THRESHOLDS vary by company: more aggressive investigation in high-margin/low-volume settings; lower thresholds in cost-competitive markets. Answer A is incorrect: investigating every variance is too costly; investigation has its own opportunity cost (analyst time). Management by exception explicitly rejects this. Answer B is incorrect: ignoring all variances forfeits the benefit of standard costing as a control system. The whole point of variances is to surface signals. Answer D is incorrect: focusing only on favorable variances misses critical unfavorable patterns (quality issues, cost overruns, supply problems). Both directions matter.
Question 4
Hint
LEV (labor efficiency variance): actual labor hours vs standard hours allowed for actual production, measures labor productivity. PVV (production volume variance): budgeted fixed OH vs applied fixed OH, measures fixed-cost absorption based on volume. Different concepts.
Answer D. LABOR EFFICIENCY VARIANCE (LEV) and PRODUCTION VOLUME VARIANCE (PVV) measure DIFFERENT THINGS. LEV, measures DIRECT LABOR PRODUCTIVITY: actual labor hours used for actual production vs the standard hours allowed for actual production. Formula: (actual hours − standard hours allowed) × standard rate. Captures: are workers producing efficiently relative to time standards? Drives operational decisions about training, supervision, work flow. PVV (also 'fixed overhead volume variance'), measures FIXED OVERHEAD ABSORPTION: budgeted fixed overhead vs the fixed overhead applied to product based on actual production volume. Formula: budgeted fixed OH − applied fixed OH (which equals actual production × predetermined rate per hour × standard hours per unit). Captures: did actual production reach the budgeted volume that was used to set the predetermined rate? Drives strategic decisions about capacity utilization. KEY DIFFERENCES: (a) LEV is about LABOR EFFICIENCY at given production; PVV is about VOLUME LEVEL at given fixed cost structure. (b) LEV is operations-driven (worker productivity); PVV is strategy-driven (how much production we planned vs actual). (c) LEV is a real cost variance (more labor hours = more wages); PVV is an absorption mechanism artifact (cash fixed cost is the same regardless). (d) LEV measured in labor hours × rate; PVV measured in fixed-OH dollars. WHY THEY GET CONFUSED: both involve the comparison of 'actual' to some 'standard/budget,' both can be computed from monthly data, both feed into management reports. But the underlying questions are different: 'Are workers efficient?' (LEV) vs 'Did we reach planned volume to absorb fixed costs?' (PVV). Answer A is incorrect: completely different formulas and concepts. Answer B is incorrect: not a unit/dollar distinction; both measure cost effects in dollars. Answer C is incorrect: this swaps the definitions; LEV is about labor hours, not production volume.
Question 5
Hint
Unfavorable labor EFFICIENCY variance: actual hours used > standard hours allowed. Causes, poor productivity, machine downtime, low-quality inputs requiring rework, scheduling issues, bottlenecks, training time. NOT caused by wage rates, material prices, or production volume per se.
Answer B. An unfavorable labor EFFICIENCY variance arises when actual labor hours used EXCEED the standard hours allowed for the actual production. Common causes include: (1) lower-than-standard worker productivity (poor training, low experience, lack of motivation); (2) machine breakdowns or downtime forcing workers to wait; (3) lower-quality inputs that require extra processing time; (4) inefficient scheduling or materials handling; (5) bottlenecks in upstream operations; (6) high turnover requiring extensive on-the-job training. Lower-quality raw materials forcing workers to spend time on inspection, sorting, and rework directly extends the labor hours required per unit of finished output, a textbook cause of unfavorable LEV. The extra time is consumed at the planned standard rate per hour, multiplied by the extra hours used.
Why not A: Wage rate increases affect the labor RATE variance (unfavorable rate), not the efficiency variance. The efficiency variance is about HOURS used, holding the standard rate constant.
Why not C: Production volume changes shift fixed overhead absorption (volume variance), not labor efficiency. Higher production at the same per-unit standard hours simply uses proportionally more total hours; the standard hours per unit don't change.
Why not D: Material prices affect the material PRICE variance (unfavorable price), not labor efficiency. Maxwell's labor efficiency variance is about the hours of labor used per unit of finished output, not about material cost.
Question 6
Hint
Year-end variance closure: each variance closed separately. UNFAVORABLE (debit balance) → Cr variance, Dr COGS. FAVORABLE (credit balance) → Dr variance, Cr COGS. Net COGS effect = sum of unfavorable − sum of favorable. Both variance accounts zeroed.
Answer B. YEAR-END VARIANCE CLOSURE under the simple method (close all variances to COGS): each variance account has its own balance that must be CLOSED separately. UNFAVORABLE variances (debit balances) → CREDIT the variance, DEBIT COGS. FAVORABLE variances (credit balances) → DEBIT the variance, CREDIT COGS. Variance accounts must be ZEROED OUT at year-end. RENTON'S SCENARIO: $20,000 UNFAVORABLE Fixed OH Spending Variance (debit balance in the variance account). Closing entry: DEBIT COGS $20,000; CREDIT Fixed OH Spending Variance $20,000. (Zeros the spending variance; increases COGS.) $15,000 FAVORABLE Fixed OH Volume Variance (credit balance in the variance account). Closing entry: DEBIT Fixed OH Volume Variance $15,000; CREDIT COGS $15,000. (Zeros the volume variance; decreases COGS.) NET COGS IMPACT: COGS increases by $20,000 (spending) − $15,000 (volume) = $5,000. Both variance accounts are zeroed. INCOME STATEMENT EFFECT: COGS up $5,000 net. Operating income down $5,000. PRORATED METHOD (more accurate alternative when variances are material): allocate variances among Work-in-Process Inventory, Finished Goods Inventory, and COGS based on relative balances. Each variance is closed proportionally to where it actually 'belongs' (the products being made and sold). PRORATED METHOD ENTRIES: split each variance among WIP, FG, and COGS proportionally (separate entries per account per variance). MATCHING THE BALANCE: in the closing entry, the DEBIT to the variance account (for favorable variances) or CREDIT to the variance account (for unfavorable variances) must equal the EXACT BALANCE in that account. For Renton: Spending Variance had $20K debit balance → credit $20K. Volume Variance had $15K credit balance → debit $15K. Answer A is incorrect: 'Dr COGS $5,000 only' doesn't close the variance accounts (they retain their $20K and $15K balances). Both variance accounts must be zeroed. Answer C is incorrect: combining them as 'Dr Spending Variance $35K' is mathematically wrong, Spending has only $20K balance to close. Answer D is incorrect: variances DO need explicit closing entries; balances don't 'cancel themselves out' without journal entries.
Question 7
Hint
Variable OH: spending + efficiency variances. Fixed OH: spending + VOLUME variance. Volume variance is fixed-OH-specific, measures under/over-absorption when actual activity ≠ planned activity used to set predetermined rate.
Answer D. VARIABLE OH and FIXED OH have different variance structures: VARIABLE OH VARIANCES: (1) SPENDING (RATE) variance = actual variable OH − (variable rate × actual hours). Captures: did we pay more per hour for variable resources than expected? (2) EFFICIENCY variance = (variable rate × actual hours) − (variable rate × standard hours). Captures: did we use more hours of activity than the standard for actual production? FIXED OH VARIANCES: (1) SPENDING (BUDGET) variance = actual fixed OH − budgeted fixed OH. Captures: did we spend more on fixed costs than budgeted? (Different from variable spending, uses budgeted total, not rate × hours.) (2) VOLUME variance = budgeted fixed OH − applied fixed OH (predetermined rate × actual hours or activity used). Captures: did production activity reach the budgeted level used to set the predetermined rate? KEY POINT: VOLUME VARIANCE IS SPECIFIC TO FIXED OH. It doesn't apply to variable OH because variable OH automatically scales with activity (no 'absorption' issue). For fixed OH, the predetermined rate is set assuming a budgeted activity level; if actual activity differs, fixed OH is over- or under-absorbed in product cost, the volume variance captures this difference. Volume variance is unfavorable when actual activity < budgeted (under-absorption) and favorable when actual > budgeted (over-absorption). It's a pure ABSORPTION-ACCOUNTING ARTIFACT, total cash fixed cost is the same regardless. Answer A is incorrect: spending variance applies to BOTH variable and fixed OH (with different formulas). Answer B is incorrect: variable OH has no volume variance (no absorption issue); fixed OH has volume variance specifically. Answer C is incorrect: efficiency variance applies to VARIABLE OH (using more or fewer hours than standard for actual output); doesn't exist for fixed OH (which doesn't scale with hours).
Question 8
Hint
Theoretical standards: 100% efficiency, perfect conditions, no allowances. Currently attainable (practical) standards: realistic conditions with normal allowances for breaks, downtime, scrap. Practical produces meaningful variances; most companies use practical.
Answer C. STANDARD-SETTING APPROACHES: standards are reference levels of performance against which actuals are measured. Two main types: THEORETICAL (or IDEAL) STANDARDS: assume 100% efficiency under PERFECT CONDITIONS, no machine downtime, no breaks, no scrap, no rework, no learning curve, no setup time. EXAMPLES: a worker producing units at maximum theoretical speed continuously throughout an 8-hour shift with no interruptions. WHY USED: occasionally in industries seeking 'aspirational' targets or as a 'maximum potential' benchmark. EFFECT ON VARIANCES: actual performance always falls short → consistently UNFAVORABLE variances. Demoralizing for workers; doesn't distinguish 'normal' from 'exceptional' inefficiency. CURRENTLY ATTAINABLE (or PRACTICAL) STANDARDS: reflect REALISTIC PERFORMANCE under NORMAL OPERATING CONDITIONS, incorporate ALLOWANCES for breaks (e.g., 15 min/4hr), machine downtime (e.g., 5% for typical maintenance), normal scrap (e.g., 2% defect rate), startup time, learning curves, and other expected inefficiencies. EXAMPLES: a worker producing a unit in 8 minutes (with 5% allowance for breaks/downtime built in). WHY USED: most companies use practical standards. Variances meaningfully signal exceptional performance (vs typical operations). Achievable with effort, motivating workers. PRODUCES MEANINGFUL VARIANCES: deviations from practical standards represent genuine performance signals, not just gaps to perfection. SETTING PRACTICAL STANDARDS: typically based on (a) historical performance under acceptable conditions, (b) industrial engineering studies (time and motion), (c) industry benchmarks, (d) capacity analyses with realistic adjustments. UPDATING STANDARDS: standards should be reviewed and updated periodically (e.g., annually). Outdated standards distort variances and lose informational value. PROCESS IMPROVEMENTS may justify tightening standards; new constraints (regulations, materials, equipment changes) may require loosening. PRACTICAL ALSO USED FOR: BUDGETING (achievable target), PERFORMANCE EVALUATION, COST ESTIMATION, TRANSFER PRICING, INVENTORY VALUATION (where standards approximate cost). Answer A is incorrect: variances ARE computed against practical standards. The distinction between cost accounting and budgeting use is artificial. Answer B is incorrect: trade associations don't set company-specific standards; companies set their own (with industry data as input). Answer D is incorrect: theoretical isn't 'historical actuals'; it's the perfect-conditions theoretical limit. Practical incorporates real-world allowances, which can be projected from past data but isn't 'projection' as opposed to historical.
Common questions
What is the direct labor rate variance formula?
Multiply actual hours by actual hourly rate minus standard hourly rate. Maple’s calculation is 1,100 × ($18 − $20) = −$2,200.
When is a labor rate variance favorable?
It is favorable when the actual hourly rate is below the standard rate. Maple paid $18 instead of $20, saving $2 on each actual hour.
Is actual payroll the same as labor rate variance?
No. Maple’s actual payroll is $19,800, but its rate variance is the $2,200 savings compared with paying the standard rate for those same hours.
Watch it solved
A full CPA BAR task-based simulation on Managerial and cost accounting, worked step by step.
Activity-Based Costing & Standard Cost Variances | CPA BAR TBS on YouTube
Practice BAR like the real exam
The free ChatCPA simulator: real exam layout, timed testlets, starting with a question on this topic. No account needed to start.
Open the free simulator →More on Managerial and cost accounting
- Special Orders With Idle Capacity: Relevant Costs Only
- Special-Order Minimum Price With a Machine-Hour Bottleneck
- Make or Buy: Avoidable Fixed Costs and Freed Capacity
- Absorption vs Variable Costing: Operating Income Difference
- ABC vs. ABM: Cost Pools, Drivers, and Management Decisions
- Process Costing Equivalent Units: Weighted-Average vs FIFO
- Direct Materials Price Variance: Net Favorable and Unfavorable
- CVP Break-Even Units and Sales Dollars: Contribution Margin
Questions from the ChatCPA bank of 17,658 CPA exam questions, each with a written reason for every wrong answer. ChatCPA is built by Nicholas Miller, CPA (Oregon #14907). How these pages are made. Spot an error? Tell us.