BAR · Business Analysis · 6 practice questions
CVP Break-Even Units and Sales Dollars: Contribution Margin
Only contribution margin, the sales amount left after all variable costs, covers fixed costs. Below: a worked calculation that finds break-even units and converts them to sales dollars.
Try one first
Hint
Compute contribution margin per unit by subtracting all variable costs per unit (including variable selling) from price, then divide total fixed costs (manufacturing plus S&A) by that contribution margin.
Answer D. Total variable cost per unit = $10 + $6 = $16, so contribution margin per unit = $40 − $16 = $24. Total fixed costs = $120,000 + $60,000 = $180,000. Break-even units = $180,000 ÷ $24 = 7,500 units.
Why not A: This comes from dividing total fixed costs by the selling price ($180,000 ÷ $40 = 4,500), a shortcut that conflates price with contribution margin. Break-even in units must use contribution margin per unit (price minus all variable costs).
Why not B: This is tempting if a student omits the variable selling cost and uses only the $10 variable manufacturing cost, which overstates contribution margin and understates the break-even point. Variable selling costs must be included when computing contribution margin per unit.
Why not C: This reflects using only fixed manufacturing overhead ($120,000) and ignoring fixed selling & administrative costs, which understates total fixed costs. Break-even requires all period fixed costs.
Worked example
Cedar Co. sells one product for $100 per unit. Variable manufacturing cost is $50 per unit, and variable selling cost is $10 per unit. Annual fixed manufacturing overhead is $200,000, and annual fixed selling expense is $80,000. Selling price and the cost structure stay unchanged. Find annual break-even units and sales dollars.
| 1 | Total variable cost per unit$50 + $10 = $60 | $60 per unit |
| 2 | Contribution margin per unit$100 - $60 = $40 | $40 per unit |
| 3 | Total fixed costs$200,000 + $80,000 = $280,000 | $280,000 |
| 4 | Break-even units$280,000 ÷ $40 = 7,000 | 7,000 units |
| 5 | Contribution margin ratio$40 ÷ $100 = 40% | 40% |
| 6 | Break-even sales dollars$280,000 ÷ 40% = $700,000 | $700,000 |
Cedar breaks even at 7,000 units, or $700,000 in annual sales.
Check: At 7,000 units, $700,000 of sales minus $420,000 of variable costs leaves exactly $280,000 to cover fixed costs.
Key points
- Break-even means zero operating income, not zero sales.
- Fixed costs are covered by total contribution margin, not deducted when finding contribution margin per unit.
- The calculation assumes the stated selling price and cost structure stay unchanged.
How the exam traps you
- Omitting variable selling cost gives 5,600 break-even units. Subtract both variable costs: $100 minus $50 minus $10 leaves $40 per unit.
- Dividing fixed costs by selling price gives 2,800 units. Divide by the $40 contribution margin, not the $100 selling price.
- Ignoring fixed selling expense gives 5,000 break-even units. Include both fixed manufacturing and fixed selling costs in the numerator.
Question 2
Hint
When more than one product is sold, convert the expected mix into a composite bundle and use its weighted-average contribution margin.
Answer A. Product H has a $20 contribution margin, and Product L has a $12 contribution margin. Under the new 1:3 mix, one composite group of 4 units contributes $56. Dividing $126,000 by $56 gives 2,250 composite groups, and 2,250 groups times 4 units equals 9,000 total units.
Why not B: This comes from using the old 3:1 sales mix. That mix gives a $72 composite contribution margin and 1,750 composite groups, but the question asks for break-even under the new mix.
Why not C: This comes from dividing fixed costs by Product L's $12 contribution margin as if only Product L were sold. The company expects a 1:3 mix, so the correct calculation uses the composite contribution margin for that mix.
Why not D: This comes from taking a simple average of the two unit contribution margins, $16, and dividing fixed costs by that amount. Break-even for multiple products must use the weighted-average contribution margin from the expected sales mix.
Question 3
Hint
Find contribution margin per unit first, then determine how much total contribution margin is needed.
Answer A. The contribution margin per unit is $24, computed as $60 minus $36. Required unit sales for a target profit equal fixed costs plus target operating income, divided by contribution margin per unit. That gives ($192,000 + $48,000) / $24 = 10,000 units.
Why not B: This comes from dividing fixed costs plus target income by selling price: $240,000 divided by $60. It fails because CVP uses contribution margin per unit, not sales price per unit.
Why not C: This comes from dividing only the target income by contribution margin per unit: $48,000 divided by $24. It fails because fixed costs must be covered as well.
Why not D: This comes from covering fixed costs only: $192,000 divided by $24. It fails because the required volume must also provide the target operating income.
Question 4
Hint
Set up operating income in two ranges: at or below 25,000 units, and above 25,000 units. In the higher range, distinguish carefully between costs that apply to all units and costs that apply only to the excess units.
Answer C. Contribution margin before the capacity trigger is $70 - $29 - $5 = $36 per unit. At 25,000 units operating income is zero because 25,000 × $36 = $900,000. For Q > 25,000 an extra $90,000 fixed cost and $2 per excess unit apply, so operating income = 34Q - 940,000; solving 34Q > 940,000 gives Q > 27,647.06, so the first integer unit with positive income is 27,648.
Why not A: Tempting if the candidate stops after finding that 25,000 units is the original break-even and assumes the next unit creates profit. This ignores the trigger: exceeding 25,000 forces the supplemental line and extra handling costs, which push the company back into a loss for volumes just above capacity.
Why not B: Matches the result if one includes only the $90,000 step-fixed cost but forgets the additional $2 variable handling cost on units above 25,000. Including that $2 per excess unit delays profitability to a higher volume.
Why not D: Attractive if the candidate incorrectly applies the $2 additional handling cost to all units rather than only to units above 25,000. That misapplication understates per-unit contribution and yields an erroneously higher threshold.
Question 5
Hint
For break-even in sales dollars, convert unit data into a contribution margin ratio before dividing fixed costs.
Answer A. Contribution margin per unit is $30, computed as $80 minus $50. The contribution margin ratio is $30 divided by $80, or 37.5%. Break-even sales dollars equal fixed costs divided by the contribution margin ratio, so $150,000 divided by 37.5% equals $400,000.
Why not B: This comes from dividing fixed costs by 30% after confusing the $30 unit contribution margin with a contribution margin ratio. The sales-dollar formula requires the ratio, which is $30 divided by $80, not 30%.
Why not C: This comes from finding 5,000 break-even units and multiplying by the $50 variable cost. Break-even sales dollars are based on revenue at break-even volume, so the units must be multiplied by the $80 selling price instead.
Why not D: This comes from treating break-even sales dollars as equal to fixed costs. That fails because sales must first generate enough contribution margin to cover fixed costs, and variable costs consume part of each sales dollar.
Question 6
Hint
Build one composite sales bundle from the stated mix, find its total contribution margin, then convert back to Product A units.
Answer B. Use a composite group of 3 units of A and 2 units of B. That group has contribution margin of $130, so the company needs 2,000 groups to cover $260,000 of fixed costs. At 3 units of A per group, break-even sales of Product A are 6,000 units.
Why not A: This is the total break-even units for both products combined, not the units of Product A alone. After finding 2,000 composite groups, total units are 10,000, but only 6,000 are Product A.
Why not C: This answer results from treating the two products as if they were sold equally. The stated mix is 3 units of A for every 2 units of B, so Product A must represent more than half of total break-even units.
Why not D: This comes from translating the break-even mix into Product B units instead of Product A units. With 2,000 composite groups, Product B would be 4,000 units, but the question asks for Product A.
Common questions
Do variable selling costs count in contribution margin?
Yes. Subtract all variable costs from selling price, including variable selling costs. Here, $50 of manufacturing cost plus $10 of selling cost leaves $40 of contribution margin.
How do you calculate break-even sales dollars?
Divide fixed costs by the contribution margin ratio. Here, $280,000 divided by 40% gives $700,000 of break-even sales.
Do fixed selling costs belong in the break-even formula?
Yes. Include all fixed operating costs. Here, the $80,000 fixed selling expense joins $200,000 of fixed manufacturing overhead, so total fixed costs are $280,000.
Watch it solved
A full CPA BAR task-based simulation on Managerial and cost accounting, worked step by step.
Activity-Based Costing & Standard Cost Variances | CPA BAR TBS on YouTube
Practice BAR like the real exam
The free ChatCPA simulator: real exam layout, timed testlets, starting with a question on this topic. No account needed to start.
Open the free simulator →More on Managerial and cost accounting
- Special Orders With Idle Capacity: Relevant Costs Only
- Special-Order Minimum Price With a Machine-Hour Bottleneck
- Make or Buy: Avoidable Fixed Costs and Freed Capacity
- Absorption vs Variable Costing: Operating Income Difference
- ABC vs. ABM: Cost Pools, Drivers, and Management Decisions
- Process Costing Equivalent Units: Weighted-Average vs FIFO
- Direct Materials Price Variance: Net Favorable and Unfavorable
- Direct Labor Rate Variance: Formula and Calculation
Questions from the ChatCPA bank of 17,658 CPA exam questions, each with a written reason for every wrong answer. ChatCPA is built by Nicholas Miller, CPA (Oregon #14907). How these pages are made. Spot an error? Tell us.