PracticeBARFree practice exam

BAR · Business Analysis · 8 practice questions

Maximum Additional Debt Under Coverage and Leverage Covenants

Maximum additional debt is the smaller amount allowed by the coverage and leverage tests. Below: calculate both limits, verify compliance, and fund the remaining need with equity.

The ruleCalculate additional borrowing capacity under each covenant, including existing debt and interest plus the new borrowing's effects. Use the smallest limit, then choose a financing mix that satisfies every stated threshold.

Try one first

Company R expects Year 1 EBIT of $12 million (depreciation $2 million) and has market-value equity of $40 million. Current debt is zero. The company plans to issue fixed-rate debt at 6% and must satisfy both (a) an interest-coverage covenant requiring EBIT ÷ interest expense ≥ 3.0 and (b) a target maximum debt-to-total-capital ratio of 40% (debt ÷ (debt + market-value equity) ≤ 0.40). Ignore taxes, transaction costs, and any change in equity market value from the issuance. What is the maximum amount of new debt that is most supportable while meeting both constraints?
Hint

Calculate the maximum debt allowed by the interest-coverage covenant and the maximum debt allowed by the 40% debt-to-total-capital target separately, then choose the smaller amount.

Step by step

  1. Set up the financing need

    Company A needs $150 million, has trailing EBITDA of $150 million, existing debt of $300 million, and annual interest of $30 million; new debt costs 6%. Covenants require debt/EBITDA ≤ 3.0 and EBITDA/interest ≥ 4.0; EBITDA stays unchanged, and new common equity adds neither debt nor interest.

  2. Find total interest allowed

    The coverage covenant permits total annual interest of $150 million ÷ 4 = $37.5 million. This ceiling includes existing and new interest.

  3. Convert unused interest into debt

    Unused interest capacity is $37.5 million − $30 million = $7.5 million. At 6%, that supports $7.5 million ÷ 0.06 = $125 million of additional debt.

  4. Calculate the leverage limit

    Maximum total debt is 3 × $150 million = $450 million. Subtract $300 million of existing debt to get $150 million of additional borrowing capacity.

  5. Choose the smaller ceiling

    Coverage allows $125 million; leverage allows $150 million. Maximum additional debt is $125 million, so coverage is the binding constraint.

  6. Verify both covenants

    At $125 million of new debt, total debt is $425 million and total interest is $37.5 million. Debt/EBITDA is about 2.83, and EBITDA/interest is exactly 4.0, so both tests pass.

  7. Fill the funding gap

    Issue $125 million of debt and $25 million of common equity to raise the required $150 million. An all-debt plan would produce $39 million of interest and coverage of about 3.85, violating the 4.0 minimum.

Key points

  • Remember: each covenant sets a separate borrowing ceiling, and the lowest ceiling wins.
  • An interest allowance is not debt principal; divide the unused allowance by the new borrowing rate.
  • Use EBITDA in this example's coverage test because the covenant explicitly requires it.
  • Equity fills the funding gap without adding debt or interest in this example.

How the exam traps you

  • Choose $150 million because it passes the leverage test. Coverage permits only $125 million; passing one covenant is not enough.
  • Divide the full $37.5 million interest allowance by 6%. Subtract $30 million of existing interest first, leaving $7.5 million for new interest.
  • Treat $7.5 million of interest capacity as borrowing capacity. Divide $7.5 million by 6% to obtain $125 million of additional debt.

7 more, each from a different angle

0 of 7 answered · 0 correct

Question 2

Company X needs $2,000,000 to fund an expansion. Management proposes two financing plans:
Plan APlan B
Debt issued (6% interest)$800,000$200,000
Common equity issued$1,200,000$1,800,000
Required return on equity13%11%
The corporate tax rate is 21%. Assume the market values of debt and equity equal the amounts to be issued and that the stated required returns are the relevant costs of capital. Which financing plan results in the lower weighted average cost of capital (WACC)?
Hint

Calculate the after-tax cost of debt, then compute WACC = w_d·r_d(1 − T) + w_e·r_e for each plan using the given issue amounts as market-value weights.

Question 3

Raven Co. is evaluating whether to issue additional long-term debt and use the proceeds to repurchase common stock. Management expects the new debt to increase earnings per share in a normal year because of the lower cost of debt and the tax deductibility of interest. Raven already has a relatively high debt-to-equity ratio, and after the proposed borrowing its projected times-interest-earned ratio would be only slightly above the minimum required by an existing loan covenant. Assume no other financing changes are planned. Which statement best identifies the main limiting condition on Raven's use of additional debt?
Hint

Do not stop at the tax advantage of debt. Ask what can limit leverage when a company is already near a covenant boundary.

Question 4

North Ridge Co. targets debt at 35% to 40% of total capital. Because of a prior debt-financed share repurchase and a cyclical earnings decline, funded debt is now 47% of total capital and forecasted funded debt-to-EBITDA for Year 2 is 3.3x. Its revolving credit agreement limits funded debt-to-EBITDA to 3.5x, and management normally relies on the revolver for seasonal working-capital needs. North Ridge must commit within 30 days to build a plant requiring $60 million of permanent capital, but the plant is not expected to contribute meaningfully to EBITDA until Year 4. Management believes the stock is somewhat undervalued. Assume the project is strategically necessary, any additional borrowing would push forecasted funded debt-to-EBITDA above the covenant limit before the plant contributes, and no covenant amendment, asset sale, or preferred stock issuance is available within the decision window. What is the best action?
Hint

Prioritize the financing source that fits a permanent need without increasing debt at a time when leverage and covenant headroom are already the binding constraints.

Question 5

Lakeview Components, a cyclical manufacturer, currently has debt equal to 58% of total capital, compared with its board-approved target range of 40%-45%. About 70% of its debt is variable-rate, and one-third matures within 12 months. Projected EBIT-to-interest coverage for Year 2 is 2.6x, and the lending agreement requires at least 2.5x, tested quarterly. Lakeview wants to finance a new automated distribution center that will support operations for about 15 years. Management's primary objective is to fund the project while reducing capital structure risk and lowering the chance of a covenant breach in a mild downturn; management is willing to accept dilution if that meaningfully improves financial flexibility. Assuming all four financing choices are available on reasonable terms, which action is best?
Hint

Identify which financing choice best addresses the company's stated priority, not just the cheapest source or the asset-life matching rule.

Question 6

At the start of 20X6, Mesa Co. is evaluating how to finance a permanent plant expansion. Mesa currently has a debt-to-equity ratio of 1.92 to 1, and its primary loan agreement prohibits it from exceeding 2.00 to 1. Its fixed-charge coverage is 2.15x, and the expansion is not expected to generate significant cash inflows for 15 months. Management prefers debt because the after-tax borrowing rate is lower than the cost of issuing new common stock, and an equity issue would dilute current owners' EPS and voting percentage. Assume either financing source is available and no other terms change. What is the primary capital structure issue Mesa should focus on?
Hint

Do not stop at 'debt is cheaper.' Ask which fact in the stem most constrains Mesa before the new plant starts generating cash.

Question 7

Alpha Co. needs $20 million of permanent financing for an expansion and is comparing two plans: Plan D, issue $20 million of long-term debt at 7%, or Plan E, issue $20 million of common equity. Assume issuance costs are irrelevant, operating assets and EBIT would be the same under either plan, and management's objective is to choose the financing plan that best supports an optimal long-term capital structure rather than simply maximize EPS. Alpha currently has $30 million of debt outstanding at 6%. Next year's total EBIT is expected to be $9.8 million, but management considers $7.8 million a realistic downside case. If Plan D is selected, a loan covenant would require EBIT-to-interest expense of at least 3.0x at year-end. Which conclusion is best supported?
Hint

Do not stop at the nominal cost of debt or expected EPS. Compare interest-coverage headroom under both the expected case and the realistic downside case.

Question 8

Marigold Manufacturing is evaluating a $200 million acquisition. Pro forma Year 1 operating income (EBIT) after the acquisition is projected at $60 million. The company currently has annual interest expense of $6 million and an existing bank covenant requiring an interest coverage ratio (EBIT / interest) of at least 3.0. Management proposes to fund the acquisition entirely with $200 million of new debt at 8% interest (additional annual interest = $16 million) rather than issuing equity. The industry is cyclically sensitive and earnings can decline sharply in downturns. What is the primary capital-structure issue management should consider?
Hint

Compute the pro forma interest coverage (EBIT ÷ total interest) and compare it to the stated covenant; weigh immediate lender remedies/default risk against longer-term theoretical benefits.

Drill all 113 Capital structure questionsMixed across every rule in the topic, so you have to spot which one applies. That is how the exam does it.

Common questions

How do you calculate maximum additional debt under an interest coverage covenant?

Divide the required earnings measure by minimum coverage, then subtract existing interest. Divide the remaining interest capacity by the new-debt rate: ($150 million ÷ 4 − $30 million) ÷ 6% = $125 million.

What if debt-to-EBITDA allows more borrowing than interest coverage?

Use the smaller limit. Here, debt-to-EBITDA allows $150 million of additional debt, but coverage limits borrowing to $125 million.

How can a company fund more than its covenant debt capacity?

In this example, issue $125 million of debt and $25 million of equity to meet the $150 million funding need. Equity adds neither debt nor interest under the stated tests.

Practice BAR like the real exam

The free ChatCPA simulator: real exam layout, timed testlets, every topic in the section. No account needed to start.

Open the free simulator →

More on Capital structure

All Capital structure practice →

Questions from the ChatCPA bank of 17,658 CPA exam questions, each with a written reason for every wrong answer. ChatCPA is built by Nicholas Miller, CPA (Oregon #14907). How these pages are made. Spot an error? Tell us.