AUD · Assessing Risk and Developing a Planned Response · 7 practice questions
Weak AP Controls and ITGCs: How to Change the Audit Plan
When control weaknesses make accounts payable controls unreliable, do not plan to rely on them; increase substantive procedures. Below: an audit-planning scenario with possible responses and explanations.
Try one first
Hint
Think about how increased control risk from override, personnel turnover, and ineffective ITGCs affects the auditor’s acceptable detection risk and then map that to changes in nature, timing, and extent of procedures.
Answer A. The identified issues (management override risk from manual journal entries, turnover in key finance roles, incomplete IT general controls after a mid‑year ERP implementation, and weak segregation of duties) increase control risk and reduce confidence in the operating effectiveness of controls. To achieve the auditor's overall acceptable audit risk, the auditor should reduce planned acceptable detection risk and therefore increase the nature, timing, and extent of substantive procedures and avoid reliance on untested controls until they are proven effective; the auditor should also communicate significant control deficiencies to management and those charged with governance.
Why not B: Tempting because when controls are documented and operating effectively the auditor can rely on them and shift work to interim dates for efficiency. It fails here because the facts indicate unreliable controls (management override, incomplete ITGCs, weak segregation, turnover), so increasing reliance or reducing substantive testing without testing the controls would be inappropriate.
Why not C: Tempting because significant control weaknesses may prompt remediation efforts. It fails because an auditor should not preemptively postpone the financial statement audit or issue an ICFR opinion as a planning response; instead the auditor adjusts the planned procedures, performs more substantive testing, and communicates deficiencies. An adverse opinion on ICFR is only relevant if the auditor is engaged to audit ICFR and after completing the evaluation of controls.
Why not D: Tempting because stable processes can make analytical procedures effective, and analytics can be efficient. It fails here because the weak control environment and specific deficiencies increase control risk and generally require larger sample sizes and more tests of details; analytical procedures may supplement but cannot replace the increased substantive testing needed when detection risk must be reduced.
What should you do?
The situation
During planning for Harbor Manufacturing's financial statement audit, you find an ERP three-way match that blocks unmatched invoice payments. The controller can change vendor records, approve payments, and post year-end AP adjustments. ERP administrators share a login, and activity logs are missing. The owner reviews monthly expense totals but not vendor changes or payment details. No effective compensating controls have been identified.
Avoid control reliance; expand year-end AP tests of details, cutoff tests, and journal-entry testing.
Best Larger samples and testing near year-end reduce detection risk when access weaknesses and conflicting duties undermine the match.
Rely on the automated match and reduce substantive AP testing.
Wrong Automation does not overcome access weaknesses or the controller's ability to change vendors, approve payments, and post adjustments.
Treat the owner's expense review as compensating and retain planned control reliance.
Wrong The review does not address vendor changes or payment details, so it does not resolve the identified weaknesses.
Replace AP tests of details with trend analysis of monthly expenses.
Wrong High-level trends alone do not adequately address unauthorized payments or manual AP adjustments in this weak control setting.
Wait for management to repair controls before performing substantive AP testing.
Wrong The auditor should revise procedures now, not postpone substantive testing while waiting for remediation.
Key points
- Remember: An automated match cannot support reliance when weak access controls let people bypass or alter it.
- Higher assessed risk calls for lower planned detection risk, not smaller substantive samples.
- Reviewing expense totals does not automatically compensate for unchecked vendor changes and payment approvals.
How the exam traps you
- Assuming an automated three-way match makes AP controls reliable. Evaluate the access controls and conflicting duties that can undermine the match.
- Treating the owner's high-level expense review as an effective compensating control. Determine whether the review actually addresses unauthorized vendor changes and payments.
- Waiting for management to repair controls before expanding substantive testing. Revise the plan now; expand substantive AP testing rather than postponing it for remediation.
Question 2
Hint
Focus on whether the same person controls multiple key steps in the transaction cycle and whether management monitoring actually addresses that risk.
Answer C. The facts show poor segregation of duties and weak management monitoring. A single person who can create vendors, authorize purchases, and release payments can both initiate and conceal improper disbursements, increasing the risk of material misstatement in cash disbursements. The auditor would ordinarily assess higher risk and plan stronger responses for this process.
Why not A: This distractor relies on separating operational weaknesses from financial reporting risk. Weak controls over vendor setup and cash payments can directly lead to misstated expenses, liabilities, or cash, so the issue is relevant to the financial statement audit.
Why not B: This is tempting because any management review can seem like oversight. However, budget-to-actual reports are high level and do not address vendor master changes, payment releases, or bank reconciliation issues; they do not mitigate the incompatible duties identified.
Why not D: Authorization limits may be useful, but they do not address the core problem that one person controls vendor creation, approval, and payment release. A dollar threshold does not substitute for proper segregation of duties or effective oversight.
Question 3
Hint
Consider how unresolved prior‑year misstatements, weak monitoring/tone at the top, and inadequate IT general controls for a new ERP affect whether process-level controls can be relied upon, especially for manual, judgmental, or cut‑off risk areas.
Answer C. Multiple indicators (recent senior management turnover, unresolved prior-year revenue misstatement, weak monitoring, and inadequate ITGCs for a newly implemented ERP) increase the risk that revenue controls will not operate effectively and raise the risk of management override. Because revenue recognition now includes judgmental bill‑and‑hold transactions and many manual journal entries and reconciliations lack independent review, the auditor should not rely on controls and should perform expanded substantive procedures focused at or near year‑end (cut‑off testing, contract-term review, and testing manual entries).
Why not A: Tempting because explicit transactional controls exist and, if they worked, could support reduced substantive testing. It is wrong here because pervasive control‑environment weaknesses, unresolved prior misstatement, and deficient ITGCs for the new ERP substantially undermine the reliability of process controls; approvals also cover only a portion of transactions, so reliance would be inappropriate.
Why not B: Tempting because early testing of ITGCs could be efficient if controls were stable. It is wrong because the new ERP with informal change management and developers promoting code to production creates a high likelihood that ITGCs are ineffective; early testing would not eliminate elevated year‑end cut‑off risks or address widespread manual adjustments and judgmental revenue recognition.
Why not D: Tempting because focusing on high‑dollar items and using roll‑forward is a common efficiency approach. It is wrong because high‑dollar approvals cover a limited portion of transactions, manual adjustments and judgmental revenue items are widespread, and roll‑forward from interim work would not adequately address elevated year‑end cut‑off and management‑override risks.
Question 4
Hint
Focus on what a weak tone at the top means for the auditor's willingness to trust other controls.
Answer C. The facts indicate a weak control environment: potential management override of controls, incentive pressure to manipulate results, and a lack of discipline or monitoring. These weaknesses increase the risk of material misstatement and reduce confidence in relying on controls, so the auditor would raise assessed risk and modify the nature, timing, and extent of audit procedures.
Why not A: This is tempting because in small entities senior management involvement can sometimes compensate for limited segregation of duties. However, when management itself can override controls or sets a weak tone at the top, that involvement weakens, not strengthens, the control environment.
Why not B: Some candidates may think control concerns can wait for testing, but understanding the control environment is part of planning and shapes the auditor's risk assessment and planned responses before substantive work is performed.
Why not D: Focusing only on revenue is too narrow. A weak control environment can affect many areas, including journal entries and management override, so the auditor's response should be broader than documenting a single process.
Question 5
Hint
Identify which fact undermines foundational assurance over system‑enforced controls (think IT general controls and the ability to detect or prevent unauthorized activity).
Answer D. The automated three‑way match is an application control whose effectiveness depends on IT general controls such as access management, segregation of duties, and logging. Shared administrative accounts and missing user activity logs remove assurance that processing or changes would be performed only by authorized individuals or detected if altered, so the auditor cannot rely on the automated AP control until the underlying ITGC weaknesses are addressed and tested.
Why not A: Tempting because a management review appears to provide oversight over a single clerk. Wrong because the controller both has check‑signing authority and does not reperform reconciliations; that lack of independence and reperformance reduces the effectiveness of the review and it may not detect errors or fraud, so it does not fully compensate for the segregation deficiency.
Why not B: Tempting because the automated match suggests system enforcement of controls. Wrong because consolidating purchasing and receiving approval and having the same clerk enter invoices and perform reconciliations weakens segregation of duties; additionally, if the automated match relies on compromised ITGCs it could be circumvented, reducing the control's effectiveness.
Why not C: Tempting because internal audit strengthens monitoring and its absence increases control risk. Wrong because the absence of an internal audit function by itself does not automatically invalidate controls; the auditor evaluates specific control design and operation and may still rely on controls if other safeguards (including effective ITGCs and sufficiently independent reperformance) are adequate.
Question 6
Hint
Ask whether a single automated control handled by the preparer/clearing person and a weak oversight environment is sufficient to reduce substantive testing.
Answer B. The facts indicate pervasive control‑environment weaknesses (disbanded internal audit, concentrated authority, limited segregation of duties) and heightened risk of management override and estimation error. The automated reconciliation's effectiveness is compromised because exceptions are routed to the assistant controller who also prepares and clears reconciliations. Given these conditions and the lack of policies for significant estimates, the auditor should limit reliance on entity controls and increase substantive procedures, especially testing journal entries, significant estimates, and year‑end balances.
Why not A: Tempting because a well‑designed and properly operating automated reconciliation can be an effective control over cash. It fails here because the control as described is undermined by weak segregation and oversight (exceptions go to the assistant controller who also prepares/clears reconciliations and internal audit was disbanded). Even if the automated control tested well, additional substantive testing would still be needed given the broader control‑environment weaknesses.
Why not C: Tempting because nightly reconciliations could suggest ongoing monitoring and stable balances. It fails because reconciliations do not address the risk of management override or unusual year‑end transactions; when control risk is elevated, substantive procedures are often required at or near year‑end and sample sizes may need to be larger rather than smaller.
Why not D: Tempting because management representations are readily available and assert control reliability. It fails because written representations are not sufficient audit evidence, especially when the control environment is weak, and cannot replace substantive or corroborative procedures.
Question 7
Hint
Focus on whether entity-level weaknesses can affect the reliability of more specific process controls, even before any tests of operating effectiveness occur.
Answer D. A weak control environment can pervasively increase the risk of material misstatement because it reduces the reliability of both entity-level and process-level controls. The lack of oversight, frequent controller turnover with limited GAAP competence, incompatible duties in the revenue cycle, and undocumented top-side journal entries collectively point to elevated risk. Owner-manager review is relevant but does not automatically compensate for these combined weaknesses, so the auditor should identify heightened risks and plan appropriate responses.
Why not A: This is tempting because owner involvement can be a compensating factor in small entities, but it should not be assumed to neutralize pervasive weaknesses. Owner review and signature authority do not automatically mitigate poor governance, weak reporting competence, incompatible duties, and undocumented overrides, which can still undermine control effectiveness.
Why not B: The auditor's understanding obtained at planning is intended to inform the initial risk assessment and audit strategy. Forming an initial conclusion about the control environment at planning is required; the auditor should not defer judgment until after operating-effectiveness testing.
Why not C: This distractor focuses narrowly on fraud risk; although management override is a fraud-related concern, weaknesses in the control environment also affect the design, implementation, and reliability of routine process-level controls, so the impact is broader than fraud considerations alone.
Common questions
Can an auditor rely on an automated AP match when ITGCs are weak?
Not when the relevant IT general control weaknesses undermine that match. Here, shared administrator access and missing logs undermine assurance that unauthorized changes would be prevented or detected.
How do weak AP controls change substantive audit procedures?
Use more persuasive evidence, increase sample sizes, and perform more testing near year-end. Target AP transaction details, cutoff, and manual journal entries that can bypass the automated match.
Must management fix weak AP controls before substantive testing starts?
No. Expand substantive testing now rather than waiting for repairs. Any later control reliance requires evidence that the relevant controls operate effectively.
Watch it solved
A full CPA AUD task-based simulation on Understanding an Entity's Control Environment and Business Processes, worked step by step.
Control Deficiencies and Audit Response | CPA AUD Simulation (TBS) on YouTube
Practice AUD like the real exam
The free ChatCPA simulator: real exam layout, timed testlets, starting with a question on this topic. No account needed to start.
Open the free simulator →More on Understanding an Entity's Control Environment and Business Processes
- Control Environment vs. Process Controls: AUD Classification
- Management Override Risk: Tone at the Top in AUD
- AUD Walkthroughs When You Do Not Rely on Controls
- When to Update Audit Understanding After an ERP Change
All Understanding an Entity's Control Environment and Business Processes practice →
Questions from the ChatCPA bank of 17,658 CPA exam questions, each with a written reason for every wrong answer. ChatCPA is built by Nicholas Miller, CPA (Oregon #14907). How these pages are made. Spot an error? Tell us.