AUD · Assessing Risk and Developing a Planned Response · 6 practice questions
When to Update Audit Understanding After an ERP Change
A significant system change requires a prompt update to understanding and risk assessment when the auditor learns of it. Below: an ERP change timeline showing the required response even when a primarily substantive audit is planned.
Try one first
Hint
Focus on whether a system‑wide change requires updating the auditor’s understanding immediately and what evidence is required before relying on newly automated controls.
Answer A. A system-wide ERP implementation that automates key controls is a significant change requiring the auditor to update the understanding of the control environment as soon as practicable. The auditor must obtain evidence about the design and implementation of the new automated controls and, before relying on them, obtain evidence of operating effectiveness; if there is insufficient operating history, substantive procedures should be increased at year-end. Prompt walkthroughs and testing support a timely, risk‑based response and avoid relying on controls without adequate evidence.
Why not B: Tempting because the implementation is late in the year and deferring seems efficient. However, the auditor must respond to significant changes when they occur; waiting until year‑end risks missing design or implementation deficiencies that would affect the audit approach and the timing or nature of required procedures.
Why not C: Tempting if one assumes automation does not change controls. However, a new ERP alters control design and data flows; prior walkthroughs of manual processes do not provide adequate evidence about the new system's design or implementation, so new procedures are needed.
Why not D: Tempting because management documentation is readily available and substantive tests can provide direct evidence. However, management's documentation and self‑assessment alone are not sufficient; the auditor needs independent evidence about design and implementation and may need to test operating effectiveness before deciding not to rely on controls.
The timeline
- July, Year 2The auditor walks through Company X's manual revenue process.
The auditor documents the existing process and plans a primarily substantive audit.
- October 1, Year 2Company X implements a new revenue ERP.
The ERP replaces manual processing and automates relevant revenue controls. July's documentation describes the old process.
- Two weeks before year-endThe auditor first learns of the October implementation.
Learning of this significant change triggers a prompt update, even though the planned audit remains primarily substantive.
- Year-end planningPromptly update the understanding of the revenue process.
Trace how transactions are initiated, processed, and posted to the general ledger under the new ERP.
- Year-end planningEvaluate relevant controls' design and determine implementation.
Inspect configuration records and observe processing. Management inquiry alone does not establish implementation.
- Year-end planningRevise the revenue risk assessment and planned responses.
Use the updated understanding before finalizing the assessment and responses. Do not wait for evidence of a misstatement.
Key points
- Remember: Learning of the significant change triggers the update, not a decision to rely on controls.
- Distinguish the ERP launch date from the date the auditor learns of the change.
- Management's description alone does not establish that relevant controls have been implemented.
How the exam traps you
- Keep July's documentation because a primarily substantive audit is planned. Update the affected process understanding and risk assessment regardless of the planned audit strategy.
- Wait until audit procedures reveal a misstatement caused by the ERP. Respond promptly when the significant change becomes known; a misstatement is not the trigger.
- Use management inquiry alone to establish implementation of the new controls. Corroborate inquiry through procedures such as inspecting records or observing processing.
Question 2
Hint
Do not confuse the requirement to understand relevant controls and business processes with the separate decision to test operating effectiveness or rely on controls.
Answer D. Auditing standards require obtaining an understanding of the entity's information system and business processes relevant to financial reporting, including how transactions are initiated, processed, recorded, and reported and the controls that address those risks. That understanding includes automated processing and the entity's use of service organizations and must be obtained during the risk-assessment phase even if the auditor plans a primarily substantive approach, because it informs identification and assessment of risks and the nature/timing/extent of further procedures.
Why not A: Tempting because candidates sometimes equate a substantive approach with no control-related understanding. However, required risk-assessment procedures include obtaining an understanding of the business process and information system regardless of whether controls will later be relied upon.
Why not B: While a weak control environment affects risk assessment, it does not eliminate the auditor's duty to obtain an understanding of the revenue process and IT processing. Presuming maximum control risk without that understanding would be inconsistent with required risk-assessment procedures.
Why not C: This confuses sequencing: the auditor must first understand the process and relevant controls (including design and implementation) to assess risks and decide whether operating-effectiveness testing is necessary. Testing operating effectiveness is required only if the auditor plans to rely on those controls or if substantive procedures alone are insufficient.
Question 3
Hint
Ask whether events after the interim test could affect control operation through the period end and whether the interim evidence still covers the balance‑sheet date; if not, additional testing near year‑end is usually required.
Answer A. Significant events occurred after the interim testing (a new AP system implementation, turnover of key personnel, and temporary disabling of a key control). Interim evidence alone does not provide assurance that controls continued to operate effectively through the balance-sheet date. The auditor should perform additional tests at or near year-end, including targeted testing of the new system and the re-established vendor-master control, and perform roll-forward procedures to cover the period between the interim tests and year-end.
Why not B: Tempting because interim tests were clean and reconciliations continued, but incorrect: post-interim changes (system implementation, personnel turnover, and a temporarily disabled control) could have altered control effectiveness after May, so additional near-period-end evidence is needed to support reliance.
Why not C: While abandoning reliance and increasing substantive procedures is a permissible strategy, it contradicts the auditor's stated plan to rely on controls. The question asks for the appropriate timing to support reliance, and targeted additional testing could appropriately provide that evidence.
Why not D: Retesting the disabled control is necessary but not sufficient: the new AP system and personnel turnover could affect multiple controls (including IT-dependent controls), so limiting testing to a single control is unlikely to provide adequate evidence for broad reliance.
Question 4
Hint
Do not let a planned substantive approach narrow what the auditor must understand during risk assessment, especially when the client added a new transaction stream and system interface.
Answer A. Auditing standards require the auditor to obtain an understanding of the entity's system of internal control relevant to the audit, including information-processing and business processes for significant transaction streams. A new web sales channel, system interface with a third-party platform, manual overrides to product coding and cutoff entries, and delayed access removals are changes and risk indicators that require a current-period understanding of how transactions flow and which controls exist and are implemented. That understanding is required even when planning a primarily substantive approach because it informs identification and assessment of risks and the design of appropriate substantive procedures.
Why not B: This is tempting because candidates often (incorrectly) equate a substantive approach with no need to refresh process understanding. However, the auditor must still understand the system of internal control relevant to the audit and evaluate whether relevant controls are designed and implemented after a significant change to transaction processing; assessing control risk at maximum does not eliminate required risk-assessment procedures.
Why not C: Attractive because the third-party platform is integral to the transaction flow and a SOC report can be useful evidence. But obtaining a service auditor report is not a prerequisite to understanding the user entity's processes, interfaces, and manual interventions; the auditor should update their understanding of the client's processes first and may later consider service-organization reports as part of the evidence mix.
Why not D: Plausible because delayed access removals suggest a pervasive control weakness that warrants attention. However, required risk-assessment work includes both entity-level and process-level understanding for significant classes of transactions; deferring process-level understanding until after substantive procedures are drafted reverses the proper sequencing and could lead to ineffective audit planning.
Question 5
Hint
When automated application controls are central, ask which layer of controls must work for those application controls to be reliable.
Answer C. Automated application controls in an ERP depend on underlying IT general controls to ensure that programs run as intended and that changes are authorized. If ITGCs (such as access and change management) are not operating effectively, application controls and automated reconciliations may be unreliable, so the auditor cannot base the audit approach on those automated controls. Other factors (tone at the top, complexity, segregation) influence overall risk and the extent of substantive testing, but they do not by themselves permit reliance on application controls without effective ITGCs.
Why not A: Significant judgment and complex valuation procedures raise inherent risk and may increase the need for substantive procedures. Yet many valuation computations can be automated, and whether the auditor can rely on those automated calculations depends on the effectiveness of the supporting ITGCs rather than complexity alone.
Why not B: Management override and a weak control environment increase fraud risk and suggest a need for substantive testing. However, they are not the primary determinant of whether automated application controls can be relied upon, that depends on whether the ITGCs that support those application controls are operating effectively.
Why not D: Poor segregation of duties can allow errors or fraud to go undetected and may require additional testing. Nevertheless, even with segregation issues, the question of relying on automated ERP controls primarily hinges on whether the ITGCs that ensure correct processing and program changes are effective.
Question 6
Hint
Focus on whether understanding internal control is required only for control reliance, or more broadly for current-year risk assessment.
Answer B. A recurring engagement does not eliminate the auditor's responsibility to obtain and update an understanding of internal control for the current year. Changes in personnel, processing location, and automated workflows can alter risks of material misstatement and affect the design of audit procedures, so the auditor must update the understanding when the changes are identified and before finalizing the risk assessment and planned responses.
Why not A: This is tempting because candidates often equate understanding internal control with planning to rely on controls. But GAAS requires an understanding of internal control to identify and assess risks regardless of whether the auditor plans to test operating effectiveness or rely on controls; the trigger here is the identified change in the process and control environment, not a later decision about reliance.
Why not C: This distractor appeals to the idea that substantive results can retrospectively show whether a change mattered. However, risk assessment and the design of audit responses are iterative and must reflect known changes during the year; the auditor cannot defer updating the understanding until after year-end substantive testing.
Why not D: While prior-year knowledge can be used on recurring engagements, it cannot simply be rolled forward when current-year changes affect relevant controls or processes. Fraud indicators are not the only triggers; ordinary operational, personnel, or system changes require a current-year update.
Common questions
When must an auditor update understanding after an ERP implementation?
Promptly when the auditor learns of the significant change. Update the affected process understanding and risk assessment before finalizing the assessment and planned responses.
Does a primarily substantive audit require an updated understanding of controls?
Yes. The auditor still needs a current understanding of the affected process and must evaluate relevant controls' design and determine whether they have been implemented.
Is management inquiry enough to determine whether new ERP controls are implemented?
No. Use procedures beyond inquiry, such as inspecting configuration records and observing processing, to determine whether the relevant controls have been implemented.
Watch it solved
A full CPA AUD task-based simulation on Understanding an Entity's Control Environment and Business Processes, worked step by step.
Control Deficiencies and Audit Response | CPA AUD Simulation (TBS) on YouTube
Practice AUD like the real exam
The free ChatCPA simulator: real exam layout, timed testlets, starting with a question on this topic. No account needed to start.
Open the free simulator →More on Understanding an Entity's Control Environment and Business Processes
- Control Environment vs. Process Controls: AUD Classification
- Management Override Risk: Tone at the Top in AUD
- AUD Walkthroughs When You Do Not Rely on Controls
- Weak AP Controls and ITGCs: How to Change the Audit Plan
All Understanding an Entity's Control Environment and Business Processes practice →
Questions from the ChatCPA bank of 17,658 CPA exam questions, each with a written reason for every wrong answer. ChatCPA is built by Nicholas Miller, CPA (Oregon #14907). How these pages are made. Spot an error? Tell us.