AUD · Assessing Risk and Developing a Planned Response · 6 practice questions
AUD Walkthroughs When You Do Not Rely on Controls
A substantive audit approach does not remove the requirement to understand relevant processes and evaluate control design and implementation. Follow a revenue walkthrough from a new sales platform to the general ledger.
Try one first
Hint
Think about AU-C 315: what does understanding controls and processes primarily help the auditor decide about the audit approach?
Answer D. Under AU-C 315, obtaining an understanding of the control environment and business processes is a risk-assessment and planning activity. That understanding enables the auditor to identify and assess risks of material misstatement and to determine the nature, timing, and extent of further audit procedures (including whether to test controls). It is not primarily an engagement to opine on control effectiveness or to guarantee detection of every misstatement.
Why not A: While auditors may communicate control deficiencies or suggest improvements, identifying operational inefficiencies and recommending process improvements is not the primary objective during audit planning; the focus is on risks of material misstatement and audit planning.
Why not B: This is tempting because knowledge of controls helps decide whether to test and rely on them, but auditors of nonissuers generally do not issue a separate opinion on operating effectiveness; the primary planning purpose is risk assessment and audit procedure design.
Why not C: Auditors provide reasonable, not absolute, assurance and cannot promise to detect every material misstatement. The immediate purpose of understanding controls is to identify and assess risks and plan responsive procedures, not to guarantee detection of all misstatements.
Step by step
- Understand oversight and authority
Delta Co. has strong management oversight and a new sales platform; the auditor plans substantive revenue procedures without control reliance. Understand management's oversight and assignment of authority, but do not treat strong oversight as a substitute for learning the sales process.
- Trace the sales transaction
Follow one Delta sale from customer order through the new platform, its ledger interface, and financial statement reporting. Ask staff what they do, then observe the process and inspect its records.
- Follow the rejected item
The sale is rejected at the interface, and the controller corrects it through a manual revenue entry. Determine who authorizes, records, and reviews the correction.
- Evaluate control design
Identify controls over the interface rejection and manual correction. Evaluate whether they could prevent, or detect and correct, a material revenue misstatement.
- Determine whether controls are implemented
Use observation and inspection, not inquiry alone, to determine whether the identified controls exist and Delta uses them. This does not establish that they operated effectively throughout the audit period.
- Plan the audit response
Use the transaction flow and control findings to identify and assess revenue misstatement risks and plan substantive procedures. A walkthrough supports that understanding; it does not automatically provide the operating effectiveness evidence needed for control reliance.
Key points
- Remember: Choosing substantive procedures does not let you skip understanding the process and its controls.
- Strong management oversight does not explain how Delta's new platform handles a rejected sale.
- A walkthrough can support design and implementation work without establishing operating effectiveness throughout the audit period.
How the exam traps you
- Skip process understanding because the audit is substantive. Obtain the required process and control understanding during risk assessment, before designing further audit procedures.
- Treat management's description as proof that controls are implemented. Combine inquiry with observation or inspection to determine whether relevant controls exist and are being used.
- Assume one walkthrough proves controls operated effectively all year. Separate design and implementation work from testing operating effectiveness for reliance.
Question 2
Hint
Focus on the risk assessment approach that helps the auditor understand both who is responsible for key control-related duties and how a transaction actually moves through the system.
Answer B. The auditor must obtain an understanding of the control environment and relevant business processes as part of the risk assessment. Inquiries identify management oversight, authority, and responsibilities, while a walkthrough (observation and inspection) traces a transaction end-to-end to see how controls are performed in practice. Together these procedures provide a sound basis to identify and assess risks of material misstatement.
Why not A: This is tempting because prior documentation is useful background, but the auditor cannot simply assume controls and processes are unchanged or effective based on another firm's prior-year work. The auditor must obtain a current-year understanding through their own risk assessment procedures and perform additional procedures if relying on prior documentation.
Why not C: This reflects a common misunderstanding. Even when planning to rely primarily on substantive procedures, the auditor must still understand the entity and its internal control system (including the control environment and revenue process) to assess risks and design appropriate substantive work.
Why not D: Inquiry is an important risk-assessment procedure, but by itself it usually does not provide sufficient evidence about how transactions actually flow or how controls operate. Walkthroughs, observation, and inspection provide necessary corroboration.
Question 3
Hint
Do not let 'no planned reliance on controls' shortcut the auditor's risk assessment responsibilities.
Answer B. The auditor must obtain an understanding of the entity's control environment and relevant business processes sufficient to identify and assess risks of material misstatement. That requirement is not waived merely because the auditor does not plan to rely on controls. Here, the unresolved facts involve override, exception handling, and the flow of transactions and journal entries through the system, so the auditor needs more process understanding before finalizing the risk assessment.
Why not A: Tempting because candidates sometimes equate 'no control reliance' with 'no internal control work.' However, auditors still must obtain an understanding of the control environment and relevant business processes to identify and assess risks and to design appropriate substantive procedures; setting control risk to maximum does not eliminate that requirement.
Why not C: Attractive because the facts show automation and potential override risk, but tests of operating effectiveness are not automatically required merely because overrides exist, especially if the auditor does not plan to rely on controls. The immediate requirement is to complete the process and control understanding to support the risk assessment and the nature/timing/extent of further procedures.
Why not D: Plausible because the facts suggest a weak control environment, but the auditor has not yet gathered sufficient understanding to conclude a significant deficiency exists. Communication to governance about a deficiency is required when deficiencies are identified and evaluated, not as the very next step before completing the risk assessment.
Question 4
Hint
Focus on what the auditor must understand during risk assessment before deciding how much reliance, if any, can be placed on management oversight or later substantive testing.
Answer D. The auditor must obtain an understanding of the relevant business process and control environment for any significant transaction stream to assess the risk of material misstatement. A new sales channel with manual daily uploads by a single clerk and unclear approval authority creates obvious points where errors or fraud could occur. Therefore the primary focus is on how transactions are initiated, processed, and reviewed and on whether approval and adjustment responsibilities are properly assigned.
Why not A: While undocumented controls may indicate weaknesses, absence of written policies alone does not determine the audit opinion. At the planning stage the primary concern is understanding the process, controls, and assignment of responsibilities, not prematurely concluding on reporting outcomes.
Why not B: This is tempting because strong management oversight in small entities can mitigate some control risks. However, management involvement does not eliminate the auditor's responsibility to understand how transactions are processed and where misstatements could arise, particularly when manual uploads and unclear approval authority exist.
Why not C: Some candidates may think substantive testing can substitute for early understanding, but risk assessment (including understanding business processes) must occur early enough to identify and assess risks of material misstatement and to plan appropriate procedures. The auditor should not defer that understanding until year-end.
Question 5
Hint
Focus on the procedure that lets the auditor see how one transaction moves through the process from start to finish.
Answer D. This describes a walkthrough, a primary risk-assessment procedure used to understand how a process is designed and operated and where controls exist or may fail. Following one transaction end-to-end lets the auditor observe who performs each step, how information flows, and where misstatements could arise, which is exactly the objective stated in the stem.
Why not A: Analytical procedures can highlight unusual relationships or potential risk areas, but they do not provide the detailed, step-by-step view of how transactions flow or how controls operate that a walkthrough provides.
Why not B: Confirmations provide external, substantive evidence about the existence (and sometimes rights) of receivables, but they are tests of account balances rather than procedures for understanding process flow or control design, so they are not the best choice here.
Why not C: Recalculating the allowance focuses on valuation and the reasonableness of management's estimate at year end; it does not reveal how sales and cash receipts transactions are initiated, processed, and controlled through the system.
Question 6
Hint
A strong tone at the top helps, but ask what the auditor still must understand to identify where material misstatements could happen.
Answer A. A favorable tone at the top can support effective internal control, but it does not replace the auditor's required understanding of relevant business processes and transaction flows. That process-level understanding is necessary to identify where material misstatements could occur and to assess the risk of material misstatement at the assertion level.
Why not B: This is tempting because candidates often overvalue owner-manager oversight in a small entity. However, close management involvement does not substitute for understanding how transactions are initiated, recorded, and processed; the auditor still needs process-level knowledge to identify risks of material misstatement.
Why not C: This distractor appeals to the shortcut that internal-control knowledge only matters when testing controls. In reality, the auditor must obtain an understanding of the entity and its internal control relevant to the audit to assess risks of material misstatement even when performing a primarily substantive approach.
Why not D: This is tempting because documentation supports control design. But small entities may have effective controls through direct owner-manager involvement and informal procedures; lack of formal documentation does not automatically mean the control environment is ineffective.
Common questions
Do auditors need to understand controls in a substantive audit?
Yes. Delta's auditor must understand the relevant revenue process and evaluate control design and implementation even without planned control reliance.
Is inquiry alone enough to determine whether controls are implemented?
No. The auditor must also use procedures such as observation or inspection to determine whether Delta's identified controls exist and are being used.
Is a walkthrough a test of controls?
Not automatically. Tracing Delta's sale helps evaluate design and implementation; control reliance requires evidence about operating effectiveness.
Watch it solved
A full CPA AUD task-based simulation on Understanding an Entity's Control Environment and Business Processes, worked step by step.
Control Deficiencies and Audit Response | CPA AUD Simulation (TBS) on YouTube
Practice AUD like the real exam
The free ChatCPA simulator: real exam layout, timed testlets, starting with a question on this topic. No account needed to start.
Open the free simulator →More on Understanding an Entity's Control Environment and Business Processes
- Control Environment vs. Process Controls: AUD Classification
- Management Override Risk: Tone at the Top in AUD
- When to Update Audit Understanding After an ERP Change
- Weak AP Controls and ITGCs: How to Change the Audit Plan
All Understanding an Entity's Control Environment and Business Processes practice →
Questions from the ChatCPA bank of 17,658 CPA exam questions, each with a written reason for every wrong answer. ChatCPA is built by Nicholas Miller, CPA (Oregon #14907). How these pages are made. Spot an error? Tell us.